Many routes in,more minutes out
Revenue Turbine blends your routes into one product with pooled capacity and one weighted rate. Set the weights, then sell it on the marketplace or run it on your switch.
Wholesale buyers commit volume to one route with one rate and enough channels to carry it, not to a list of suppliers.
Revenue Turbine gives them that. Pick the routes and supplier trunks you hold, set a weight for each one, and it prices the blend from its members, adds up their channels and calls per second, and weights their ASR and ACD. Publish it and it sells on the marketplace like any other route, at its blended rate. On your switch, calls work through the members in the priority order you set and fail over to the next if one does not complete, so the capacity you already hold is put to work instead of sitting idle behind one supplier.
Blended pricing
One rate, weighted across members, that buyers see and pay.
Cheapest complete blend
Build the lowest-cost set of members that still covers every prefix of the destination.
Sell it on the marketplace
Publish and it lists like any other route, at its blended rate.
Run it on your switch and dialer
Point a route group or a dialer campaign at the blend instead of a single supplier.
Test before you sell
Place a caller ID test through each member and compare what arrives.
From spare supply to one product
A blend is a route in its own right. Build it once and it lists, sells and routes through the same machinery as every other route on PacketExchange.
- 01
Pick the members
Choose from the routes you list, the routes you have bought and your own supplier trunks, up to 20 in one blend.
- 02
Set the mix
Give each member its rate, route type, channels, calls per second and weight. The blended rate, pooled capacity and weighted quality update as you go.
- 03
Close the gaps
Coverage is measured against every prefix you hold supply for in the destination. One click builds the cheapest blend that covers all of them.
- 04
Sell it or run it
Publish it to the marketplace at the blended rate, or keep it private for your own route groups and dialer campaigns. Test each member's caller ID first.
One rate a buyer can say yes to
Wholesale buyers commit volume to a route, a rate and enough channels to carry it, not to a list of suppliers. Revenue Turbine turns the routes you already hold into exactly that. Weight each member and the blended rate is the weighted average of their rates. Their channels and calls per second add up into one pooled figure, and their stated answer rates and call durations are weighted the same way as the rate. Change a member and every number moves with it, before anything is saved.
- Your own listings, routes you have bought and your Switch supplier trunks, side by side in one blend.
- Channels fill in from each member route or trunk, and stay editable.
- A blend with no enabled member cannot be saved, so it can never list as a free route.
- $0.0125/minUK Mobile · PremiumMy route · 120 ch40%
- $0.0100/minUK Mobile · StandardPurchase · 100 ch35%
- $0.0104/minSupplier BSwitch supplier · 80 ch25%
3 members, 1 blend, 300 channels.
Published, it lists at exactly this rate. Buyers see one route.
Complete by construction
An average rate looks healthy even when the blend behind it reaches only part of a country, and the cheapest blend is often cheap precisely because it left the expensive networks out. Revenue Turbine measures coverage against every prefix your account holds supply for in the destination, for mobile, fixed or both, and lists what is missing, dearest first, with the cheapest route you hold for each. Build cheapest complete blend gives every prefix to whichever of your routes prices it lowest, so no prefix is left without a route and none costs more than it has to.
- The gap list names each prefix, its destination and the cheapest rate you hold for it.
- Coverage is measured again every time the blend is opened, so a member that shrinks is caught.
- Prefixes that cannot be read as mobile or fixed are counted and shown, never quietly folded in.
28 prefixes you hold supply for are not in this blend, so calls to them will not complete.
| Prefix | Destination | Cheapest you hold |
|---|---|---|
| 44741 | United Kingdom Mobile | $0.0212 |
| 44789 | United Kingdom Mobile | $0.0187 |
| 44757 | United Kingdom Mobile | $0.0164 |
| and 25 more | ||
Covers all 240 mobile prefixes available to you, across 4 members.
Check the caller ID on every member before you sell
A blend is only as good as its weakest member, and a route that rewrites the number can hide inside an average. Test blend places a caller ID test through each member route, and a person in the destination country answers each call and reports what displayed. The results line up member by member, so you know which route alters the number, and which one to drop, before the blend goes on sale.
- Presented and reported numbers side by side, marked Match, Partial, Replaced or Restricted.
- Results arrive within 24 hours, because a real handset has to answer.
- Supplier trunks are skipped: the test runs through member routes.
An opted-in handset in each member's destination country answers and reports what displayed. Results arrive within 24 hours.
- UK Mobile · PremiumReportedPresented+44 7700 900123Reported+44 7700 900123ResultMatch
- UK Mobile · StandardReportedPresented+44 7700 900123Reported+44 7700 900000ResultPartial
- UK Mobile · DirectTestingPresented+44 7700 900123Reported-Result-
Supplier trunks in the blend are not tested. The test runs through member routes.
What goes into a Revenue Turbine blend
Pricing, capacity, coverage and proof, all computed from the members you choose.
Routes, purchases and trunks
Blend your own listings, routes you have bought and your Switch supplier trunks: up to 20 members, each used once, voice or SMS.
Weighted blended rate
The weighted average of the member rates. Leave every weight at zero and the members count equally.
Pooled channels and CPS
Channels and calls per second add up across enabled members, so one listing carries the capacity of all of them.
Weighted quality
Stated answer rate and call duration are weighted across member routes and saved on the blend with its rate.
Coverage by number type
Measure against mobile, fixed or both, and see covered prefixes out of the total, with every gap and its cheapest supply.
Cheapest complete blend
Each prefix goes to your lowest-priced route. Members are weighted by the share of prefixes they won and prefilled with what those prefixes cost you.
A publish gate
Listing an incomplete blend, or dropping a member from a public one, stops at the gap until you choose to go ahead.
Caller ID test per member
One test through each member route, with the presented and reported numbers side by side.
More minutes out of the supply you already hold
Revenue Turbine is built for the order no single route of yours could win on its own.
Take the bigger order
A buyer who needs more channels than any one of your routes carries sees a single listing with the pooled capacity of the whole blend, at one rate.
Price between the tiers
Mix a premium route with a standard one and sell a rate the middle of the market buys. Member rates are yours to set, so the margin is built in before you publish.
No holes sold as a product
Coverage is checked against the supply you hold before a blend can list, so the calls a blend cannot carry show up in your editor instead of in a buyer's failed calls.
Buyers see one route
A published blend lists like any other route, with one rate and one capacity figure. The members behind it, and what they cost you, stay yours.
Selling volume across several routes
| The usual way | With Revenue Turbine | |
|---|---|---|
| What the buyer gets | A list of suppliers and a mix to work out themselves | One listing, one rate and pooled channels |
| Pricing a mix | A spreadsheet average that drifts when a member changes | Recomputed from the members on every change and saved with the blend |
| Coverage | Missing prefixes found when calls start failing | Gaps listed before publishing, dearest first, with the cheapest supply you hold |
| Building the cheapest set | Hours comparing rate sheets prefix by prefix | One click gives each prefix to your lowest-priced route |
| A member fails | The order stalls on one weak supplier | In a route group on your switch, the next member takes the call |
| Caller ID | Test the whole product and guess which supplier altered the number | One test per member, with results side by side |
Price between tiers
Mix a premium and a standard route into a rate the middle of the market buys.
Take the bigger order
Say yes to volume that no single supplier of yours could carry alone.
One rate for the buyer
Sell a single product with one price, not a supplier list.
Build as many blends as you like
Building, previewing and saving a blend costs nothing. A published blend sells at exactly its blended rate, and buyers pay that rate plus the platform fee of 2% of the carrier rate, capped at $0.001 per call.
There is no separate sell price, so your margin lives in the member rates. A member added from a purchase or a supplier trunk starts at the rate you pay for it: raise it before you publish.
See all pricingFree to build
Previews, coverage checks and cheapest complete proposals carry no charge.
Sold at the blended rate
Buyers pay one rate, whichever member carries the call.
Caller ID tests per member
Each member test is billed from your balance, like any other caller ID test.
Your balance is prepaid: top up by card or crypto from $5, or by bank wire from $100.
Revenue Turbine, answered
How is the blended rate worked out?
It is the weighted average of the member rates, using the weights you set. Capacity and calls per second are the sums across enabled members, and the stated answer rate and call duration are weighted in the same way as the rate.
Which routes can go into a blend?
Routes you list, routes you hold an active purchase of, and your own supplier trunks. A blend carries one kind of traffic, voice or SMS, holds up to 20 members, uses each route or trunk once and cannot contain another blend.
How does a call travel through a blend?
Each call terminates on one member, and the buyer pays the blended rate whichever member carries it. When a blend runs in a route group on your switch, it expands into its members, and a member that fails with a retryable answer hands the call to the next one, within the group's attempt limit.
What does complete mean?
That the blend covers every prefix your account holds supply for in the destination and number type you chose. It is measured against the routes you actually hold, so the figure is exact and checkable.
Can I publish a blend that is not complete?
Yes, deliberately. Publishing an incomplete blend stops to show what is missing, and lists it only if you then choose to publish anyway. A private blend can be saved half-built for as long as you like.
Will buyers see which routes are inside my blend?
No. A published blend lists as one route with its blended rate and pooled capacity. The members and their rates are only visible to you.
Can I sell a blend and use it on my own switch?
Keep a blend private and it is supply for your own route groups and dialer campaigns. Publish it and it becomes a listing that buyers purchase; your own switch customers are never routed over your public listings.
How do I test a blend before selling it?
Use Test blend. It places a caller ID test through each member route to an opted-in handset in that route's destination country, and the results line up member by member within 24 hours. If no handset is online in the country, the test is refused up front and nothing is charged, and a leg nobody reports on closes as not tested. Supplier trunks in the blend are not tested.